Glass Units

We do not stock ready made sealed units in our shop, but we can have quality double-glazed or triple-glazed sealed units manufactured to size to all the current specifications on the market.  Whether you want to replace a broken down misted up unit, change the obscuring pattern, or add a leaded design, we can do it.  Just give us your measurements and requirements and we would be happy to provide a cost.

Misted Units
Over time the seal around a unit can break down, then condensation can get trapped between the panes giving a misted up unit. If your windows/doors are pre 2002 they would likely be standard float glass or toughened float glass, with an aluminium spacer.  Aluminium spacer bar comes in 8 different widths so with 4mm glass both sides you end up with the following overall thickness; 14mm, 16mm, 18mm, 20mm, 22mm, 24mm, 26mm, and 28mm.  Different thickness can be made using thicker glass, but this is rare. As well as silver finish the spacer also comes in dark bronze, white or gold finish so matching with existing is easy.

If you have windows or doors that were installed between 2002 and October 2010 then it is likely you would have a low-e glass on the inside pane to meet the residential thermal efficiency regulations of the time.  The most popular one used during this period was Pilkington K glass, which is a hard-coat low-e glass.  It is sometimes possible to see this by a very slight tint to the inside pane when standing at an angle, but generally looks just like clear float.  Some lesser thermal effeciant windows installed between 2002 and October 2010 may also had Argon gas in between (instead of air).  Argon gas is a colourless, odourless, inert and safe gas which is present in the Earth's atmosphere that when filled inside a unit helps stop heat escaping through the glass.  As aluminium windows are generally not as thermally efficient as Upvc or wood.

The UK home window/door regulations were tightened again from October 2010 onwards to improve the thermal efficiency.  This meant that windows and doors needed to be tested as a whole unit with the glass and frame together, so different manufacturers are using different setups depending on the type/profile being used.  The most popular setup seems to be a softcoat low-e, with argon and a warm-edge spacer. We can have units made with 2 of the best softcoats on the market - Planitherm Total + and Climaguard A. Along with warm-edge spacer avaliable in Black or White.

Triple-Glazed Units
We can also do triple glazed units, which can be made using Annealed or Toughened Glass.  Although more expensive than double glazed units they sometimes give better U-values and acoustic reductions which are great in bedooms, plus can be made using Low-E coating on the glass for better thermal efficiency.  Argon or Krypton gas can also added for extra insulation too.

UPVC Windows & Doors
If you need the whole UPVC window or Door made then we can supply them complete with advanced low-e/warm-edge/argon filled double-glazed units surpassing current regulations with A-Rating at a trade price. The main profile we currently do is Advance70 by Selecta Systems. With high security locking, high quality hardware, and avaliable in Chamfered or Sculptured profile in White or choice of grained Colours to suit any property. If you have an enquiry please feel free to email your requirements.  

Note: More updates to this page coming soon.
Ace Glass & Mirrors Limited is Registered in England and Wales Company No: 06080069   VAT No: 884 2188 93
Registered Office Add: 87-89 Alder Road Poole, BH12 2AB
Copyright Ace Glass & Mirrors Ltd 2006-2023

Terms & Conditions    Privacy Policy, GDPR & Cookies    Contact
Flat Glass Merchant
Processed Glass & Mirrors Made to Order